I've been experiencing init (io) issue in our ubr-10k. Most of you will suggest its a config file issue but the scenario is like this.
We have 6 10k UBRs running smoothly but this 6th UBR with card c8/0/0 and c8/0/1 is having init io modems. Before our configuration is 12x6 in our combiner but we migrated the said card'ss (c8/0/0[for node1]and c8/0/1[for node2]) to 20x6, both of them. After doing so we experienced this init IO issue.
Frequency we are using before is 561000000 to 627000000 which is for 12x6 configuration since we cannot proceed with 633000000 frequency because we already used this for other cable channel purpose we then used 241000000 to 283000000 to attain the 20x6 new combining configuration.
So as mentioned above modems in the c8/0/0 and c8/0/1 card are experiencing init IO issue. This modems were before in a 12x6 configuration.
Today I'm going to talk about SD-wan including SD-WAN advanced lab ,, first thing let's take a small brief about the SD_WAN. What is SD-WAN? SD-WAN is Software define wide area network and SD-WAN is key part of the technology o...
Leopold Fisher, Cisco Meraki IoT specialist, will introduce you to new and innovative additions to the Meraki portfolio coming in April 2021.
Meraki Vision Session
MV smart camera range is getting big...
To participate in this event, please use the button to ask your questions
Dynamic Routing Protocols & IPv6
Have any questions on dynamic routing protocols with IPv6?
In this event we will answer all your questions related to dynamic routing pro...
Today I'm going to talk about SD-wan including SD-WAN advanced , first thing let's take a small brief about the SD_WAN.What is SD-WAN? SD-WAN is Software define wide area network and SD-WAN is key part of the technology of software-definednetworking ...
The cat's out of the bag! In October 2020, Cisco announced the Next Generation of Enterprising Routing Platforms: the Catalyst 8000 Edge Platforms Family including the Catalyst 8200, Catalyst 8300, Catalyst 8500, and Catalyst 8000V. The new family of Cats...