Hello,
I want to make the flow classification on the 3750 switch.
I have 3 flow :
- voip
- visio
- other
I want allocate 1Mbit for the voip and 1Mbit for visio against the network congestion.
My classification configuration is :
class-map Voip
match access-group 102
class-map Viso
match access-group 103
policy-map VV
class Voip
police 1000000 8000 exceed-action policed-dscp-transmit
class Visio
police 1000000 8000 exceed-action policed-dscp-transmit
interface GigabitEthernet1/0/1
description LINK M->P 30Mb
ip address X.X.X.X X.X.X.X
service-policy output VV
duplex full
speed 100
access-list 102 permit ip X.X.X.X X.X.X.X any
access-list 103 permit ip X.X.X.X X.X.X.X any
I dont understand the policed-dscp-transmit ? I can choice drop but I will not that the voip and visio traffic drop if the class is full.
I must configuring a class for other traffic or by default, it use the bandwidth unallocated ?
My configuration is it good ?
thanks for your help.
lc