Configuration of 800 Series for ADSL2+, NAT, Port Forwarding

[davidpfox]

Hi All,

I am a newbie to the world of Cisco, but am preparing my first 867VAE Router for a replacement of their existing gateway. From a high level I will need to:

1. Connect to a PPPoA ADSL2+ connection
2. Port forward external to internal Server (SMTP, HTTPS) with NAT
3. Allow PPTP VPN from external to inside Microsoft Server
4. Allow remote administration over telnet or SSH

I will obviously want to keep things as secure as possible, but no need to get carried away with multiple user access as it is a small business.

Any help you can provide would be great - running IOS on version 15.2.

[Anthony Burrow]

I have a similar requirement for an 851w router.  My IOS version is 12.4.

[davidpfox]

How are you going with your config Anthony? So far I was able to get my DSL service up and going and could browse web from internal. Now I was looking at how I allow various ports from Internet into an internal Server (i.e. Port Forwarding), but do I also have to do something on CBAC/IOS Firewall to allow in?

[lonrdkelvin]

That'll do.  The filename [url=www.examsheets.com/]70-461[/url] of the SEPmacaddress.cnf.xml must be the MAC address of the phone.