Routing

Hello  Expert !   I have nine MSDP sites connected as a mesh  topology, facing issue  diconnection  twice  every " . What will be the cause ? How to resolve this issue?  KV

My organization has only one SMTP server in the main office. Main office ASA email logging works just fine. L2L VPN works perfectly fine. Remote site clients can connects to the main office SMTP server and send emails via L2L VPN just fine. Only remo...

Which is the IVR code for web acces on ATA 190?

pls let me know whether 867 VAE K9 supports HSRP or not , As per data sheet no where it says HSRP support.

Hi Team, We have two routers R1 and R2.R1 is connected to R2 via point to point link. Behind R1 we have a large networks connected with all runnning EIGRP with process 110. The interface on R1 connecting to R2 is under AS110. Behind R2 wehave large n...

Hi,We're in the process of testing a number of ASR9001 (IOS-XR 5.1.2) that will serve as replacement route-reflectors, however we've been having the hardest time identifying the correct MIB OID values for SNMP monitoring via Nagios.We have downloaded...

Hi all, I am having some trouble finding this, but I am wanting to know if there is a debug commands to find out the BGP Notification Error Codes for OPEN and Message Header (see link below) http://www.inetdaemon.com/tutorials/internet/ip/routing/bgp...

please help meI have cisco asa 5505 with 8.2 outside is 111.22.200.51inside is 192.168.1.0/24 dhcpvpnpool is 192.168.10.1-192.168.10.30configured split tunnel to vpn client to access web I was able to connect from outside via vpn. Goal is access file...

I have been trying to troubleshoot a 2125 WLC  to join a 1252 access point but it has not been successful. The access point lights keep blinking.  Please do see logs below: (Cisco Controller) >show sysinfoManufacturer's Name.............................

I have a concern on the traffic flow on my hsrp setup..  I have two cisco 2900 doing hsrp and seems to be working but and all outbound traffic is going to the active vip ,but all incoming traffic is coming back through the standby router.?Both these ...