Showing results for 
Search instead for 
Did you mean: 

Configuration routeur Cisco 887VA PPPoE ADSL

mounir hasnaoui
Level 1
Level 1

how to configure Cisco 887VA ADSL PPOE thank you

2 Replies 2

Level 1
Level 1

Hi Mounir,


I just configured the same router .... 887-va ADSL  with PPPoE. 

I used the same config working config I have on my 837 router.

I am still fighting with getting a line sync on 887 router, though.



- My PVC is  0/35

Hope that helps to start with  


I have attached my configs

I am not sure if you guys are still having problems. If you are you may want to check what equipment you are trying to train up to. These routers use newer chipsets which sometimes are not compatible with the older equipment used by ISPs. Do a show int to see what hardware the card is using and cross reference the info along with the model of the router to see if your ISP is using an equipment that is compatible. You will however need some info from the ISP, sorrrrry....

Cisco ISR and ISR G2 xDSL Interoperability FAQ 

Under your Dialer int you may want to configure both CHAP and PAP authentication methods to make sure you don't run into authentication problems.

ppp authentication pap chap callin
ppp chap hostname hi
ppp chap password bye

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card