cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1798
Views
0
Helpful
4
Replies

Configuring DSCP to 802.1p CoS Remarking

webstd.design
Level 1
Level 1

Please advise for some reference link for configuring DSCP to 802.1p CoS Remarking.

QoS SRND already was checked out

4 Replies 4

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

I would have to search for a reference, but generally set CoS equal to the DSCP IPPrec value.

I'll be appreciated for some good example as best practice

Deafult Is :

http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf

Campus QoS design section might be somewhat useful.

Im interested in config, specially shape CIR, BC BE