Good Day everybody, i'm glad to joined to this community,
Right now i have a conflict, because we have the Router provide for the Internet Company, on a store, it is connected to a generic switch in a small kiosk by Ethernet, which is connected to an Athena Todoair by Ethernet as well, and in a next kiosk have the next Athena receiving the signal, and this one is connected by Ethernet to a Cisco WRT54GH and work perfect, but how we need to connect security cameras from the point B (1st kiosk) to the point C (2nd Kiosk) and the network is 192.168.100.xx but the Cisco router configure the IP on this subnet to 192.168.11.xx however i can access to the Internet Router set up page and the cameras by https ports but trying to configure the NVR (1st kiosk) to add the cameras (2nd kiosk) i don't get true i don't know if the Cisco need a customize configuration or if i'm missing e step.
I attach a simple draw with the basics data of the network.
Thank you, i hope that anybody can help me, i'm really noob configuring networks.
