I think this may be the relevant portion of the core router config. Forgot to mention I actually have 2 routers in the core running HSRP.. that's what standby statements are.
I think Jeff Van Houten's idea is essentially what I need to do.. but it's just a little nerve-racking given the possibility of breaking BGP and the routes to all my external sites, or the possibility of creating an unanticipated routing loop. I looked in my routing table and I have at least 10 static routes defined- mostly an accumulation of testing various things over the years, many of which were not put there by me. I'm just concerned the 'redistribute static' command will bring over all these routes that I don't want into my provider VPN networks. Any way to just single out the static route I mentioned above? Maybe with a route-map?
Anyway, below is part of my core router config
interface GigabitEthernet0/0
description TO-FIOS
ip address x.x.x.x 255.255.255.0
ip virtual-reassembly max-reassemblies 64
ip route-cache policy
duplex auto
speed auto
media-type rj45
crypto map rtp
!
interface GigabitEthernet0/1
description Link to Linksys Switch port 2 / EIP Fiber
ip address 10.252.5.114 255.255.255.248
duplex auto
speed auto
media-type rj45
standby 200 ip 10.252.5.116
standby 200 priority 110
standby 200 preempt
!
interface FastEthernet0/1/0
switchport access vlan 9
spanning-tree portfast
!
interface FastEthernet0/1/1
switchport access vlan 100
spanning-tree portfast
!
interface FastEthernet0/1/2
switchport access vlan 6
spanning-tree portfast
!
interface FastEthernet0/1/3
switchport access vlan 250
spanning-tree portfast
!
interface FastEthernet0/1/4
switchport access vlan 9
spanning-tree portfast
!
interface FastEthernet0/1/5
spanning-tree portfast
!
interface FastEthernet0/1/6
spanning-tree portfast
!
interface FastEthernet0/1/7
spanning-tree portfast
!
interface FastEthernet0/1/8
spanning-tree portfast
!
interface FastEthernet0/3/0
description open
no ip address
duplex auto
speed auto
standby 2 ip 10.10.2.1
standby 2 priority 110
standby 2 preempt
standby 2 track 155 decrement 20
!
interface FastEthernet0/3/1
description INTERNET
ip address 10.10.1.3 255.255.255.248
ip helper-address 10.10.9.11
duplex auto
speed auto
standby 1 ip 10.10.1.1
standby 1 priority 110
standby 1 preempt
!
interface Vlan1
no ip address
!
interface Vlan6
description PRINTER
ip address 10.10.6.7 255.255.255.0
ip helper-address 10.10.9.11
ip virtual-reassembly
standby 6 ip 10.10.6.1
standby 6 priority 110
standby 6 preempt
!
interface Vlan9
description DATA
ip address 10.10.9.7 255.255.254.0
ip helper-address 10.10.9.11
ip virtual-reassembly max-reassemblies 64
standby 9 ip 10.10.9.1
standby 9 priority 110
standby 9 preempt
!
interface Vlan100
ip address 10.100.10.7 255.255.254.0
ip helper-address 10.10.9.11
ip virtual-reassembly
standby 100 ip 10.100.10.1
standby 100 priority 110
standby 100 preempt
!
interface Vlan250
description NPVPN
ip address 10.250.0.2 255.255.255.248
ip virtual-reassembly
standby 250 ip 10.250.0.1
standby 250 priority 110
standby 250 preempt
!
router bgp 65002
bgp log-neighbor-changes
neighbor 10.252.5.113 remote-as xxxxx
neighbor 10.252.5.113 password 7 12370000220E020A7E0E0D1870
neighbor 10.252.5.113 update-source GigabitEthernet0/1
!
address-family ipv4
neighbor 10.252.5.113 activate
neighbor 10.252.5.113 default-originate
neighbor 10.252.5.113 soft-reconfiguration inbound
neighbor 10.252.5.113 maximum-prefix 250
no auto-summary
no synchronization
exit-address-family
interface GigabitEthernet0/0
description TO-FIOS
ip address x.x.x.x 255.255.255.0
ip virtual-reassembly max-reassemblies 64
ip route-cache policy
duplex auto
speed auto
media-type rj45
crypto map rtp
!
interface GigabitEthernet0/1
description Link to Linksys Switch port 2 / EIP Fiber
ip address 10.252.5.114 255.255.255.248
duplex auto
speed auto
media-type rj45
standby 200 ip 10.252.5.116
standby 200 priority 110
standby 200 preempt
!
interface FastEthernet0/1/0
switchport access vlan 9
spanning-tree portfast
!
interface FastEthernet0/1/1
switchport access vlan 100
spanning-tree portfast
!
interface FastEthernet0/1/2
switchport access vlan 6
spanning-tree portfast
!
interface FastEthernet0/1/3
switchport access vlan 250
spanning-tree portfast
!
interface FastEthernet0/1/4
switchport access vlan 9
spanning-tree portfast
!
interface FastEthernet0/1/5
spanning-tree portfast
!
interface FastEthernet0/1/6
spanning-tree portfast
!
interface FastEthernet0/1/7
spanning-tree portfast
!
interface FastEthernet0/1/8
spanning-tree portfast
!
interface FastEthernet0/3/0
description open
no ip address
duplex auto
speed auto
standby 2 ip 10.10.2.1
standby 2 priority 110
standby 2 preempt
standby 2 track 155 decrement 20
!
interface FastEthernet0/3/1
description INTERNET
ip address 10.10.1.3 255.255.255.248
ip helper-address 10.10.9.11
duplex auto
speed auto
standby 1 ip 10.10.1.1
standby 1 priority 110
standby 1 preempt
!
interface Vlan1
no ip address
!
interface Vlan6
description PRINTER
ip address 10.10.6.7 255.255.255.0
ip helper-address 10.10.9.11
ip virtual-reassembly
standby 6 ip 10.10.6.1
standby 6 priority 110
standby 6 preempt
!
interface Vlan9
description DATA
ip address 10.10.9.7 255.255.254.0
ip helper-address 10.10.9.11
ip virtual-reassembly max-reassemblies 64
standby 9 ip 10.10.9.1
standby 9 priority 110
standby 9 preempt
!
interface Vlan100
ip address 10.100.10.7 255.255.254.0
ip helper-address 10.10.9.11
ip virtual-reassembly
standby 100 ip 10.100.10.1
standby 100 priority 110
standby 100 preempt
!
interface Vlan250
description NPVPN
ip address 10.250.0.2 255.255.255.248
ip virtual-reassembly
standby 250 ip 10.250.0.1
standby 250 priority 110
standby 250 preempt
!
router bgp 65002
bgp log-neighbor-changes
neighbor 10.252.5.113 remote-as xxxxx
neighbor 10.252.5.113 password 7 12370000220E020A7E0E0D1870
neighbor 10.252.5.113 update-source GigabitEthernet0/1
!
address-family ipv4
neighbor 10.252.5.113 activate
neighbor 10.252.5.113 default-originate
neighbor 10.252.5.113 soft-reconfiguration inbound
neighbor 10.252.5.113 maximum-prefix 250
no auto-summary
no synchronization
exit-address-family
