10-28-2009 10:47 AM - edited 03-04-2019 06:32 AM
Messrs, I'd like your help! I've been trying to do a VRF config, and its doesn't work. We need to access the net 10.1.2.4/30 comes from 10.1.11.0/24 and 10.1.14.0/24. what is wrong? what is missing? Attached we have net and cfg. Thanks, Renato
10-28-2009 11:21 AM
Renato,
First off,you have to make sure that what the routing table of VRF_MFrame looks like. It will reveal what you have missed. Just do a "sh ip route vrf Mframe" command. (grin)
!
int vla 10 & int vla 14
ip vrf forwarding Mframe
!
ip route vrf Mframe 10.1.11.0 255.255.255.0 10.1.10.1
!
HTH,
Toshi
10-28-2009 11:37 AM
10-28-2009 11:45 AM
Renato,
Interface Vlan 14 is the connected interface on the VRF switch. No need to have a static route on it. Just remove it.
!
no ip route vrf Mframe 10.1.14.0 255.255.255.0 10.1.10.1
!
Like previously posted,let's try to do a "sh ip route vrf Mframe" command.
HTH,
Toshi
10-29-2009 05:03 AM
Toshi, thanks a lot!
Now, that cfg is working.
thanks,
Renato
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide