Hi there! I'm currently trying to setup Dynamic DNS for a home server I'm running so I can update multiple subdomains on it. Unfortunatly after trying multiple way of configuring it I get a Bad parameters error when Debugging is enabled. I have a Cisco 3825 connected to a switch I got to help me learn IOS as I'm working to get a CCNA (I found one for a smoking deal!). However for the life of me I just cannot figure this out. When trying to figure it out I've changed the host= to mc, mcadmin, resrise, and <h> without it working thus far.
Debug shows the following:
*Feb 7 07:23:51.231: DYNDNSUPD: Adding DNS mapping for resrise.manate.ch <=> [External IP] server 188.8.131.52
*Feb 7 07:23:51.231: HTTPDNS: Update add called for resrise.manate.ch <=> [External IP]
*Feb 7 07:23:51.231: HTTPDNSUPD: Session ID = 0x2E
In this special edition of the Insider Series, we hear from Cisco partners who have taken steps to be more eco-friendly and sustainable. We hear what inspires ASHRAE, Southwire, Igor, and NTT to create a workplace that is centered around people and how th...
We know that the Type-1 LSA describes the link type connected to the router, the neighbor router and the subnet number.In this topology, assume we dont have a Type-2 LSA, so each router will create its own Type-1 LSA, the Type-1 LSA will describe the neig...
Here are some commonly asked questions and answers to help with your adoption of Cisco DNA Center Wireless. Subscribe to this post to stay up-to-date with the latest Q&A and recommended Ask the Experts (ATXs) sessions to attend.
Q. I have a Cisco Appl...
Why IETF changed and inverted OSPF Type-7 LSA VS Type-5 LSA election In RFC 3101 compared to OLD RFC 1587?Many people learns that the Type-7 LSA and Type-5 election (ON Versus OE routes) depends on RFC 3101 for NSSA published in 2003 and RFC 1587 for NSSA...