E1 /T1 Config

[CSCO10758684]

Hai all,

One of my customer is facing the issue in IPLC (Ind to US ) ..india end its E1 ..were Us end is T1 ...Customer dont want to club 2 T1 to give E1 Output at US end ..

Is this setup possible ..if so what shud be the config at both router ..

Thanks in advance

Lijesh.N.C

[paolo bevilacqua]

Hi,

most likely you will have full T1 in the US, and 24 timeslots E1 in India.

controller e1 x/y

channel-group 0 timeslots 1-24

Hope this helps, please rate post if it does!

[CSCO10758684]

Hai,

Thanks for the reply.

This is what the config what i did, Even though link is not up

India:

Controller E1 XXX

channel group 0 time slot 1 - 24

framing NO-CRC4

Line code HDB3

Clock source line

USA

Controller T1 XXX

Channel group 0 time slot 1-24

(can you get me what should be the rest of configuration in USA end)

Lijesh.N.C

[CSCO10758684]

Hai All,

Can any one help me regarding this ..

Config (framing NO-CRC4

Line code HDB3

Clock source line ) ...is modem config

Lijesh.N.C