05-09-2016 06:26 AM - edited 03-05-2019 03:58 AM
There are 2 autonomous system, 200 and 201, configured over the sames interfaces. We need that the networks conected in COREA , DISTA, COREB and DISTB would be seen trhough eigrp 201 ( the red one lines).
The problem is with networks conected in DISTA and DISTB. The routers COREA and COREB doesn´t know this ones on eigrp 201, only on eigrp 200.
In topology command they show FD is 4294967295 ( unrecheable).
I don´t know what is wrong.
Thanks
Solved! Go to Solution.
05-11-2016 01:11 PM
I think you are over-thinking it. :-)
I don't see any benefit.
I would drop back to using a single EIGRP routing process.
05-10-2016 12:01 AM
Yucky,
You could redistribute EIGRP 200 into 201.
But the bigger question is why have two different EIGRP processes?
05-11-2016 07:22 AM
Our idea was that TA y TB see the networks originated in COREA, DISTA, COREB, DISTB by eigrp200 and this 4 routers interchange routes by eigrp 201. This four routers are conecting services ( A and B are diferents sites). TA and TB are conecting users, that consumes the services.
The idea was then, that eigrp 201 routes for services and eigrp 200 propagates this routes to clients.
Thanks
05-11-2016 01:11 PM
I think you are over-thinking it. :-)
I don't see any benefit.
I would drop back to using a single EIGRP routing process.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide