01-10-2017 02:04 PM - edited 03-05-2019 07:49 AM
In named eigrp, are stub-site and stub options allowed? See bold below.
router eigrp test ! address-family ipv4 unicast autonomous-system 1 ! af-interface Tunnel100 hello-interval 20 hold-time 60 stub-site wan-interface exit-af-interface ! topology base exit-af-topology network 10.0.0.0 network 192.168.100.0 eigrp router-id 10.5.0.51 eigrp stub-site 1:5
eigrp stub connected summary exit-address-family !
01-11-2017 09:13 AM
Hello
not really sure what you are asking. Those commands are certainly allowed with EIGRP virtual instance names. Check this example:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_eigrp/configuration/15-mt/ire-15-mt-book/ire-iwan-simpl.html#task_986397932350786969615255983807268
04-09-2018 01:38 PM
Hi,
The eigrp stub-site command is mutually exclusive with the eigrp stub command. You cannot execute both commands on a device. It is also worth saying that this eigrp stub-site command resets the peers on WAN interfaces and initiates relearning of routes from WAN neighbors. I hope this helps !
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: