Hi! Why I can't see the route from CE on PE in VPN_CUST_B?
PE:
ip vrf VPN_CUST_A
rd 1:1
route-target export 100:100
route-target import 100:100
!
ip vrf VPN_CUST_B
rd 2:2
route-target export 200:200
route-target import 200:200
!
interface Loopback0
ip address 2.2.2.2 255.255.255.255
!
interface GigabitEthernet0/0
ip address 192.168.12.2 255.255.255.0
duplex auto
speed auto
media-type rj45
mpls ip
!
interface GigabitEthernet0/1
ip vrf forwarding VPN_CUST_A
ip address 172.16.24.1 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
ip vrf forwarding VPN_CUST_B
ip address 172.16.25.1 255.255.255.0
duplex auto
speed auto
media-type rj45
!
router eigrp 1
!
address-family ipv4 vrf VPN_CUST_B autonomous-system 100
redistribute bgp 123 metric 1 1 1 1 1
exit-address-family
!
router ospf 100
network 2.2.2.2 0.0.0.0 area 0
network 192.168.12.0 0.0.0.255 area 0
!
router rip
!
address-family ipv4 vrf VPN_CUST_A
redistribute bgp 123 metric 4
network 172.16.0.0
no auto-summary
version 2
exit-address-family
!
router bgp 123
bgp log-neighbor-changes
no bgp default ipv4-unicast
neighbor 3.3.3.3 remote-as 123
neighbor 3.3.3.3 update-source Loopback0
!
address-family ipv4
exit-address-family
!
address-family vpnv4
neighbor 3.3.3.3 activate
neighbor 3.3.3.3 send-community extended
exit-address-family
!
address-family ipv4 vrf VPN_CUST_A
redistribute rip
exit-address-family
!
address-family ipv4 vrf VPN_CUST_B
redistribute eigrp 100
exit-address-family
Router#show ip route vrf VPN_CUST_B
Routing Table: VPN_CUST_B
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR
Gateway of last resort is not set
10.0.0.0/32 is subnetted, 1 subnets
B 10.0.0.1 [200/2] via 3.3.3.3, 00:02:24
172.16.0.0/16 is variably subnetted, 3 subnets, 2 masks
C 172.16.25.0/24 is directly connected, GigabitEthernet0/2
L 172.16.25.1/32 is directly connected, GigabitEthernet0/2
B 172.16.37.0/24 [200/0] via 3.3.3.3, 00:02:24a
CE:
interface Loopback0
ip address 10.0.1.1 255.255.255.0
!
interface GigabitEthernet0/0
ip address 172.16.25.2 255.255.255.0
duplex auto
speed auto
media-type rj45
no cdp enable
!
router eigrp 100
network 10.0.0.0
network 172.16.0.0
Router#show ip eigrp neighbors
EIGRP-IPv4 Neighbors for AS(100)
Router#SHOW IP route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.1.0/24 is directly connected, Loopback0
L 10.0.1.1/32 is directly connected, Loopback0
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.25.0/24 is directly connected, GigabitEthernet0/0
L 172.16.25.2/32 is directly connected, GigabitEthernet0/0
Router#ping 172.16.25.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.25.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 3/6/11 m
