I have two nearly identical 881 routers (15.4(1r)T1) running EIGRP that I am trying to mesh with an ASA5500X v9.8. Router 1 works, router 2 does not.
| R1 (working) |
R2 (non-working) |
ASA5500 |
router eigrp 1
network 1.1.1.0 0.0.0.255
network 10.63.5.0 0.0.0.7
neighbor 10.63.5.1 Tunnel1
neighbor 1.1.1.100 FastEthernet4
neighbor 1.1.1.122 FastEthernet4
eigrp router-id 1.1.1.119
no eigrp log-neighbor-changes |
router eigrp 1
network 1.1.1.0 0.0.0.255
network 10.62.5.0 0.0.0.7
neighbor 10.62.5.1 Tunnel1
neighbor 1.1.1.100 FastEthernet4
neighbor 1.1.1.122 FastEthernet4
eigrp router-id 1.1.1.118
no eigrp log-neighbor-changes
|
router eigrp 1
distribute-list eigrp in
no eigrp log-neighbor-changes
neighbor 1.1.1.100 interface outside
neighbor 1.1.1.118 interface outside
neighbor 1.1.1.119 interface outside
network 1.1.1.0 255.255.255.0
network 5.5.5.0 255.255.255.224
network 6.6.6.0 255.255.255.0 |
R2 will show as neighbors 1.1.1.100 (ASA#1) and 1.1.1.122 (ASA#2), but the RTO is 5000. I have tried removing EIGRP from R1, tried different AS #, no matter what I get is RTO 5000.
Debug eigrp transmit shows;
Aug 16 11:44:02: Building unicast STARTUP packet for 10.1.1.122, serno 0-0 for tid 0
Aug 16 11:44:02: No items in range
So far I have been unable to find anything regarding "No items in range"
Both R1 and R2 connect to the same switch the ASA is connected to, and counters R2's interface do not show any errors. I cant see where this could be a "connection" issue, especially since R1 has no issue. I believe this has to be a configuration issue. But I am unaware of where to look next. Output of eigrp neighbors:
R1
EIGRP-IPv4 Neighbors for AS(1)
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
1 1.1.1.122 Fa4 13 16:32:15 2 100 0 54
2 10.63.5.1 Tu1 12 22:15:50 180 1470 0 193
0 1.1.1.100 Fa4 12 22:15:56 243 1458 0 975
R2
EIGRP-IPv4 Neighbors for AS(1)
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 1.1.1.122 Fa4 11 00:00:32 1 5000 1 0
1 10.62.5.1 Tu1 14 00:03:15 43 1470 0 194
ASA
EIGRP-IPv4 Neighbors for AS(1)
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
1 1.1.1.119 outside 14 16:32:26 1 200 0 23
0 1.1.1.100 outside 14 16:32:26 1 200 0 978
