04-24-2012 01:38 AM - edited 03-04-2019 04:07 PM
hi gentleman
i have switch on other branch i can not ping this switch but the rest of switch i can ping it when i want to go on enable mode there is no password set ?
my question can i but enable password remotely note the branch is empty no person there
thanks
Sent from Cisco Technical Support iPhone App
04-24-2012 01:55 AM
my question can i but enable password remotely
Yes
04-24-2012 02:32 AM
Hi engbandar
if you have console access to the remote switch this should be easy. If you have no console access but only telnet access, which most likely requires a password but none is set, then I am afraid you'll need to get console access first.
HTH.
04-24-2012 03:29 AM
i have only telnet access but enable password not set this is the massage showing when i tray to access to enable mode
Sent from Cisco Technical Support iPhone App
04-24-2012 03:42 AM
you need a console access then, as thre's no way to sneak in to the enable mode remotely. Alternatively via reverse telnet you could get the same console access remotely, but you'll need a terminal server solution for that.
04-24-2012 07:58 AM
thank you
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: