Hi there.
We have 2 ASR 1001-HX routers. I've tested 3 different versions of IOSxe in order to enable securityk9 Right-to-Use license, but there was no result.
Currently active boot system image :
asr1000-universalk9.16.06.04.SPA.bin
previous images I've tested :
asr1000-universalk9.16.06.03.SPA.bin
asr1000-universalk9_noli.16.05.01b.SPA.bin
some benefit show command results and information you may want to know
!
Router#sho ver | in absent
Crypto Hardware Module absent
!
----------------------------------------------------
Feature name Enforcement Evaluation Subscription Enabled RightToUse
securityk9 yes yes no no yes
ipsec yes yes no no yes
!
These commands have been executed
license accept end user agreement
license solution level securityk9
!
license right-to-use move securityk9
license right-to-use move ipsec
!
!
!
Router#sho license right-to-use
Index 19 Feature: ipsec
Period left: Life time
License Type: RightToUse
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
Index 33 Feature: interface_10g
Period left: Life time
License Type: RightToUse
License State: Active, In Use
License Count: 1/0 (In-use/Violation)
License Priority: Low
Index 36 Feature: securityk9
Period left: Life time
License Type: RightToUse
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
Router#
I will be so appreciated if anybody can help me.