Hi,
I have designed a Carrier board based on cisco’s ESR6300 module and we are facing issues regarding LAN and WAN coming up time after IOS-XE boots up.
After powering on the ESR6300 Carrier board and after IOS-XE is booted up we ran command show running-config or show interface but LAN and WAN takes more than 3 Mins and 5 Mins respectively to come up. I first suspected magnetics or CT termination might be the issue but after removing magnetics from the board still this issue persists.
The LAN and WAN up time is still delayed and inconsistent.
I would like know what might cause this behavior on ESR6300 module and what would be the solution for it.