I'm doing a practice from the "CCNA Exploration 4.0: Accessing the WAN Student Packet Tracer Manual" (PT Activity 2.1.7: Troubleshooting a Serial Interface). I made the topology according to the image and set the IP addresses on the correct interfaces. Almost, I put the serial cable (Router2 to Router3) in the correct serial port (0/0/1 - 0/0/1).
By default, Packet Tracer sets all the routers with HDLC encapsulation.
When I try to make a ping from PC1 to PC3, I can't. I checked all my topology and I don't found the problem.
I attached and imagen and my .pkt project.
Sorry for my bad english, the project name, and the question, but I'm new using this discussion forum. Thank you for all.
We have many Nexus 3064 switches that have high CPU utilization. The graph minute and hourly graphs show it. We are on version 6.0(2)U6(6). What can be the root cause and how do I fix it? # sh proc cpu s | ex 0.0Please note tha...
Hi Freinds lets Consider the sd-wan controller will be deployed on-premise , with 2 x Transport ( MPLS and INET) each cEdge sits behind ASA , Cisco ASA perform 1 to 1 static NATING for the cEdge in order to provide Reachibility over INET vB...
Cisco helps build IT agility and business resiliency by introducing new technology innovations that help
Respond and adapt to disruptions
Accelerate your digital journey and cloud adoption
Transform your operating model with insights and automatio...
Oct 20, 2020 is an inspirational date for many of us in networking industry to be proud of. It is the birthday of Cisco Catalyst 8500 Series Edge Platforms – one of the most powerful purpose-built SD-WAN Edge platforms ever, making up to 60Gbps throughput...
Hi, Hope this can help someone. To connect local network storage, mine is DS1817+. Create port forward and connect thru internet.Do reply here if you have better or easier configuration! =D Configuration on Cisco Router:ip nat inside source stat...