cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1668
Views
0
Helpful
5
Replies

Failed to commit one or more configuration items during a pseudo-atomi

yensheng_lin
Level 1
Level 1

Hi all,

I have made some changes on our ASR9K, but it doesn't allow me to save the config.

Does any one of you know what's the reason and how we can save it?

It showing as below:

% Failed to commit one or more configuration items during a pseudo-atomic operation. All changes made have been reverted. Please issue 'show configuration failed [inheritance]' from this session to view the errors

Let me know if you need any further information.

 

5 Replies 5

Hello,

 

what changes did you make ? It is usually something like in the link below:

 

https://ciscoexam.online/CCNP/642-883/3452

yensheng_lin
Level 1
Level 1

I configed below config under a sub-interface.

service-policy input POLICE_ALL_30MB

service-policy output POLICE_ALL_30MB

Below are the current config.

interface TenGigE0/0/2/0.296
description  XXX-INTERNET
service-policy input POLICE_ALL_20MB
service-policy output POLICE_ALL_20MB
vrf INTERNET
ipv4 address x.x.x.x 255.255.255.252
encapsulation dot1q 296

Hello,

 

service-policy input POLICE_ALL_30MB <--

service-policy output POLICE_ALL_30MB <--

 

Below are the current config.

 

interface TenGigE0/0/2/0.296
description XXX-INTERNET
service-policy input POLICE_ALL_20MB <--
service-policy output POLICE_ALL_20MB <--
vrf INTERNET
ipv4 address x.x.x.x 255.255.255.252
encapsulation dot1q 296

 

Just to make sure this is not a typo, do the policy names actually match ?

Hi Georg,

 

The policy map is exist.

syd1-r01-pe#sh policy-map | in 30MB
Wed Nov 17 20:07:32.485 AEDST
policy-map POLICE_ALL_30MB

Hello,

 

what is the content of your policy ? Post the relevant part of your running configuration to show what is actually configured in the policy...

Review Cisco Networking for a $25 gift card