FRAME RELAY COMMAND ON 7600

[tona_2008]

HI,

I need your help. We have a issue with a 7606-S router and frame relay traffic shaping command.

the command frame-relay traffic-shaping is not available, when i want to configure it on a serial interface.

I have the following equipment:

RSP720CXL-R

IOS: ADVANCED ENTERPRISE SERVICES SSH 12.2(33)SRC5

SIP200> SPA-4XT-SERIAL

QUESTIONS:.

DO I NEED TO CHANGE DE IOS SOFTWARE?

DOES 7606-S SUPPORT THIS COMMAND?

DOES SPA-4XT-SERIAL SUPPORT THIS COMMAND?

WHY I CAN'T GET this command on the serial interface?

I KNOW that the flexwan module doesn't support frame relay traffic shaping,

http://www.cisco.com/en/US/partner/products/hw/modules/ps2797/products_data_sheet09186a00801df1d9.html

but, we have SIP-200.

Someone can tell me why i can't get  this command on this serial interface of the 7606 router?

thnks

[Reza Sharifi]

Hi,

It does support it, but you need 12.2(18)SXE or later.

Minimum Software Compatibility

Cisco IOS®Software Release 12.2(18)SXE, or later

Here is the data sheet:

http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9df.html

HTH

Reza