I have 2 t1 CSU/DSU WIC card in cisco2800 and cisco2651 XM. This is my fisrt time doing this. Can you please specify which cable exactly I shd use:
Frame-relay switching is enbaled on both routers globally...
below is my config
interface Serial0/0
description FR switch
no ip address
encapsulation frame-relay
no keepalive
no fair-queue
frame-relay interface-dlci 201
!
interface Serial0/0.21 point-to-point
ip address 131.1.12.2 255.255.255.0
frame-relay interface-dlci 201
interface Serial0/3/0
description FR switch
no ip address
encapsulation frame-relay
no keepalive
frame-relay lmi-type cisco
frame-relay intf-type dce
!
interface Serial0/3/0.12 point-to-point
ip address 131.1.1.1 255.255.255.0
frame-relay interface-dlci 101
