FRTS for DECnet

[Rojer-bkk]

Hi,

I got a problem with an application when it transferred data to remote site.

I found the speed of data transferring was limited under 64 Kbps, even though the communication line had bandwidth 256 kbps.

This application run on VMS and used decnet protocol.

I attached the QoS configure of head office and branch office

Thanks and appreciate for help!!

[Rojer-bkk]

have any idea?

[sfaizul]

Hi

Are you seeing any Packet drops in the qos policy applied on the interface

while transferring the file .

Regards

Syed

[Rojer-bkk]

Syed,

Queueing
        Strict Priority
        Output Queue: Conversation 40
        Bandwidth 128 (kbps) Burst 3200 (Bytes)
        (pkts matched/bytes matched) 430624/145055584
        (total drops/bytes drops) 82760/42422233

As you mentioned the cause would be packet drops so how can i solve the packet dropped issue in queue?

Thanks

[Peter Paluch]

Hello,

Please be so kind to include full outputs of the following commands:

• show policy-map
• show class-map
• show access-lists ! Interested in the ACL used in class-map
  

Best regards,

Peter

[Rojer-bkk]

Hi Peter,

Thanks for response.

I found large amount of packets dropped. I'm not sure about configuration which could be incorrect or not praticable.

Kindly see output in attach files.

Thanks!!