elaborated : -
Please find the attached document.F0/1 and F0/2 must be a group and they should go down simultaneouly as well as the second group (f0/10 and f0/20) should come up.
from diagram u can understand the purpose.
The Traffic towards primary FW should be diverted to secondary without any issues.
Tried :
1.Ether channel - won't work as both interfaces are of different criteria(trust and untrust)
2.flex links - this can be used to bring up these ports idvidulay but the grouping can not be done.
3. Policy based routing. - same issue here this can be used to bring up a route but the second interface won't come up.
Clarification required : Can we group these interfaces in any way and make them down if one of them them gone down ? by object traking or in any other way.
Ready to do the things in L2 and L3.
pls guide.
