Help needed Have a Cisco 2610 with BRI 4B-S/T how to conf?

[MJonkers]

Hi,

I have a Cisco 2610 with a BRI card (4 ports). We have on two seperate locations other Cisco routers which dial-in on this router, with a password and username specified in the Cisco 2600.

LOC A (10.130.20.245)

HQ (10.10.20.245)

LOC B (10.160.20.245)

Dialers on the LOC have a IP range of 10.10.10.0.

Can someone help me with configuring the BRI's on the 2610 to accept the calls?

Also we want to authenticate users with a radius server with dialback enabled on this 2610.

Thanks,

Marc

[rlcarr]

Here are a couple links that will get you going:

Virtual Profiles

http://www.cisco.com/en/US/customer/tech/tk801/tk133/technologies_configuration_example09186a0080094cd6.shtml

Dialback with Radius

http://www.cisco.com/en/US/customer/products/sw/secursw/ps2086/products_configuration_example09186a0080093dc9.shtml

Hope this helps,

~Ron

[MJonkers]

Ron,

I am asked to login. When I login it's says my username or password is incorrect. How can I access these documents?

Thanks,

Marc