Hello,
Here is my scenario.
Business with two locations.
LOCATION 1:
*Cisco 2811
*Firebox Watchguard X700
*T1
*Public IP on Cisco Ser
*Privite Ip 172.28.159.1 on Cisco eth0/0
*X700 also has a pub ip assigned to it
as well as a priv ip
*X700 is where I have my VPN set up to
allow the two networks to communicate.
LOCATION 2:
*Router/Modem provided by local ISP
*Firebox Watchguard Edge
*Watchguard is also set up for VPN
*Watchguard has a public ip as well
as a private IP 172.28.158.1
When I try to ping the 172.28.158.0 network, I can watch the logs on my X700 and see that it is passing the traffic through, but it is comming back as unreachable.
I'm pretty sure I need to configure a route in my 2811 to allow traffic from the local 172.28.159.0/24 net work to the 172.28.158.0/24 net work, but not sure how.
I have my vpn setup so that the pub IP on my X700 is pointing to the pub IP on my Edge. And each devices trusted network is allowed on each.
Any help would be greatly appriciated.
Thank you.
