02-13-2016 05:31 PM - edited 03-05-2019 03:20 AM
I have a router and switch configured to access the internet and would like to add this ASA 5510. Any advice on how to add this piece like what's the best practice? Should it be connected to the network through the router or switch or both?
02-14-2016 03:31 AM
Hi,
Terminate the internet connection at the router using point-to-point IP. Connect the other interface of the router with the firewall using public IP. Configure a static route from the router to the ISP. Configure NAT at the Firewall. Connect the inside interface of the firewall using Private IP block with the LAN switch.
02-14-2016 11:53 AM
02-14-2016 03:32 AM
Hi,
Terminate the internet connection at the router using point-to-point IP. Connect the other interface of the router with the firewall using public IP. Configure a static route from the router to the ISP. Configure NAT at the Firewall. Connect the inside interface of the firewall using Private IP block with the LAN switch.
02-14-2016 03:39 AM
hi,
that depends on the ISP hand off.
if it's ethernet, you can do:
ISP > ROUTER > ASA > SWITCH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide