High CPU utilization is cisco 2600 due to Syslog Traps

[sathyanarayana.b]

Hi ,

Iam facing an issue with high cpu utilization of cisco 2600 router . When i give show cpu process command i can see three  process are using high cpu those are as below

Router #sh proc cpu sorted

CPU utilization for five seconds: 90%/3%; one minute: 92%; five minutes: 87%

PID    Runtime(ms)    Invoked        uSecs    5Sec      1Min         5Min      TTY   Process

79       34734981       380093         91388    61.99%    60.36%    55.28%    0     Syslog Traps

70      3468095320    810529544     4278    14.41%     16.05%    16.15%    0      Encrypt Proc

32      2386134243    2409465973      0       6.79%       6.40%       6.57%    0      IP Input

What may be causing this issue. Can anyone help on this.....

[sathyanarayana.b]

can anyone suggets wht may be the issue.

[cisco_lad2004]

Is this constantly up or periodic?

Does log show anything which suggest traps are being generated?

Has the issue appeared suddenly ?

Samir

Sent from Cisco Technical Support iPad App