High CPU utilization on Cisco Router 7513

[ochalmers]

Hi Guys,

I have a cisco router 7513 with RSP 16 and 2 VIP 6-80 and 2 4-80, the problem is that my VIP are running at 99% CPU but my RSP is running at 21%.

i have configured Distributed Cef, and it began to happen two weeks ago, i did some research on cisco web but i can not see what could be the cause on the paper that i have read?

Please some help!!!

er-plcgua1#sh controllers vip 5 proc cpu

show proc cpu from Slot 5:

CPU utilization for five seconds: 99%/99%; one minute: 99%; five minutes: 99%

er-plcgua1#sh processes cpu

CPU utilization for five seconds: 18%/10%; one minute: 19%; five minutes: 19%

[Giuseppe Larosa]

Hello Oskar,

see this thread of some days ago Joseph has provided a useful document about this issue

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40^1%40%40.2cd2a790

the doc link is

http://www.cisco.com/en/US/products/hw/modules/ps3088/products_tech_note09186a0080094345.shtml, applies.

Hope to help

Giuseppe