Routing

Hi,I currently have several OSPF speaking Cisco devices setup (PIX 506, PIX 515, 1721, 2600).I am redistributing static routes on one of the devices, which I only want 2 of the other devices to be aware of and not the rest. What would be the best way...

What equipment will I need to connect a LAN to a T-1 connection?

Hi everyone,I apologise for posting this thread in this forum. I have also posted it in the vpn forum but find I always get a much quicker response here.I wonder if anyone can help me please. I am setting up vpn tunnels between my site and 3 other si...

i configured totally stub area between a hub and 3 spokes all the spokes routing table are included default route and Intra area routes .I'd like to remove all the intra area routes how can i do that?

I read from the book that "sh ip ospf [process id] database network" display the network link-state information.Any idea how to read and why we need to issue this command instead of the normal "show ip ospf interface" or "show ip ospf database"? Than...

I want compete solution for connectivity of Data/voice between four offices in different cities

Hi Experts,I have a debug log as attached. What's wrong with my ISDN config? I can't ping to the other side of the dialer router.The telco has check it is okay with the ISDN Number/Line.Thanks!cindyDVSRTR Router Config:interface Dialer15 description ...

Helloi have leased line connected to cisco router through int serial0/0/0 ip address 194.x.x.x, along with free public ip addresswhat iwant is to configure mail server and ftp serverand the confusion is , do i need to asign acl in the router to port...

Required result: The client has a 7600 with SIP400 and 2port GE SPA running 12.2(33SRD) IOS and they want to connect it via a 1Gb Ethernet pipe to a layer3 cloud/WAN. All the tail sites also connect to the layer3 cloud at speeds of 512Kb, 1Mb, 2Mb ...

I am practicing with a 2801 router for my ccnp but when I enter the config commandRouter bgp 100 it gives me an error message of (Protocol not in Image)Please what should I do?

We have 6506's with 6724 series line cards (with DFC's) that exibit unicast flooding after the mac timer has expired. Has anyone else seen this problem?