Hello, I have an interesting issue effecting one of my nodes. I am able to successfully ping using a 1500 byte frame but get high packet loss when using a standard 100 byte frame? Anyone seen this? I am going to have a tech go and connect to another port to see if its an issue on the port. Here is an example:
- #ping 172.xxx.xxx.xxx repeat 100
Type escape sequence to abort.
Sending 100, 100-byte ICMP Echos to 172.xxx.xxx.xxx, timeout is 2 seconds:
!!!!!!!!!..!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!
!!.!!!!!!!.!!!!!!!!!!!!!!!!!!!
Success rate is 95 percent (95/100), round-trip min/avg/max = 4/8/24 ms
- #ping 172.xxx.xxx.xxx repeat 100 size 1500
Type escape sequence to abort.
Sending 100, 1500-byte ICMP Echos to 172.xxx.xxx.xxx, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (100/100), round-trip min/avg/max = 12/17/28 ms
