How to access another VLAN via my gateway to gateway connection
just wondering if anyone wiser than me can help. I have setup my gateway to gateway connection ok and I can access each side.
in the office I have now created two more VLAN networks on the RV320
I am trying to set it up so that the remote site can access all the networks (more for Remote Desktop to the servers)
i can see in the Gw to Gw setup, the RV320 asks for a subnet of each site and I can’t seem to add the new networks to this section. I have also read about using the Advanced Routing option. The VLAN are created and have enable inter VLAN access. When I am in the office I can access all the networks but not over the GW to GW connection. Can anyone help
Re: How to access another VLAN via my gateway to gateway connection
With any VPN setup you will typically require an ACL which is used to identify "interesting" traffic (the encryption domain) destined for the remote end which will be sent via the VPN.
Looking at the RV320 configure guides it would appear that you can only define a single subnet in this ACL. The issue you have is the 192.168.2.0 subnet lies between 192.168.1.0 and 192.168.10.0 and 192.168.20.0.
Due to this limitation you need to ensure each site is allocated a contiguous address block (this would be good practice TBH) ,eg:
Cisco SD-Access 18.104.22.168 Features OverviewBorder handoff enhancements: 4-byte ASNEmbedded wireless support on Fabric edgeFiaB deployment models:Multiple VN for Guest Access in Cisco SD-AccessCisco SD-Access Group-Based Access Control PolicyCisco SD-Access ...
. My work contains abbundance of networking gear.i have 3945 routers with attatched nme,3850 switches 48 gig port with 4 tengig port,3850 switch with 16 fiber ports, fortigate 600d along with servers with 8tbs of free space.if you have any labs for me id ...
Hello I have a network in prodcution like it mensionned in this picture. The customer wants to renovate the current infrastructure by changing all the hardware. For this reason we had think about deploying DNA Center and make automat...
I want to show how to quickly and reliably troubleshoot a network using notepad++.If you are not using Cisco GENIE and your network is not very big and you have several routers/switches only.For illustration, I created a simple topology.First, the loopbac...
Join us on Tuesday, October 15 at 10:00 am PT to to learn how Equinix and Cisco enable multicloud and Hybrid IT access.
Digital transformation initiatives are driving the adoption of internet, cloud, mobile and IoT technologies. In order t...