03-14-2007 07:07 AM - edited 03-03-2019 04:09 PM
Situation:
1.There is a ADSL with dynamic public ip address and connect to router(cisco2811).So each time as router reboot will change pulic ip address.I need to access internet and connect to vpn concentrator by CISCO VPN client from internal computer.
2. Internal IP address scope :10.35.186.10/255.255.255.0
Question:
1.How to configure Dynamic NAT on ADSL with Dynamic IP address? Once router reboot don't need do any other configure.
2. And also allow internal computer connect to VPN concentrator by cisco vpn client.
Very appreciate if you may give me some informaton and configure example.
03-14-2007 07:19 AM
Hello,
Please find the NAT support page below.
http://www.cisco.com/en/US/tech/tk648/tk361/tk438/tsd_technology_support_sub-protocol_home.html
HTH,
-amit singh
03-14-2007 07:24 AM
For your ip nat command you can specify an interface, in lieu of IP address, as a global translated address.
Thanks.
03-14-2007 07:39 AM
Thanks your information.
If my understanding is right,Specify an interface is PAT. Due to our VPN client need use the NAT.
03-14-2007 07:44 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide