Showing results for 
Search instead for 
Did you mean: 

How to configure "Right to use Licence" in ASR 1002


I am trying to activiate Firewall/NAT Stateful Inter-Chassis Redundancy License on ASR 1002

As per cisco documentation the below mentioned commands should support on asr1000rp1-adventerprisek9.03.07.00.S.152-4.S.bin

but i am unable to find any commands starting with Licence

1. enable

2. configure terminal

3. license boot level {adventerprise | advipservices |ipbase}

4. exit

5. copy running-config startup-config

6. reload

here is the output of my router

Router(config)#license boot level ?

% Unrecognized command

Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.2(4)S, RELEASE SOFTWARE (fc4)

Technical Support:

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Mon 23-Jul-12 19:01 by mcpre

IOS XE Version: 03.07.00.S

Cisco IOS-XE software, Copyright (c) 2005-2012 by cisco Systems, Inc.

All rights reserved.  Certain components of Cisco IOS-XE software are

licensed under the GNU General Public License ("GPL") Version 2.0.  The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0.  For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE


System image file is "bootflash:/asr1000rp1-adventerprisek9.03.07.00.S.152-4.S.bin"

Last reload reason: Reload Command

Can any 1 help me out for the following issue or should i open a TAC with Cisco

0 Replies 0
Review Cisco Networking for a $25 gift card