Hi have 4 E1 FR configured on my router to the internet access.
We have about 2000 concurrent connections to internet over these links.
We have a lot of congestion on the links as show on she config:
What can I do to try to increase my performance an have a better internet access?
I really appreciate your help!
All my serial interfaces are configured as follow, I send the ACL too
interface GigabitEthernet0/1
description To my LAN
bandwidth 11520
ip address 172.24.24.1 255.255.255.0
ip access-group Trafico_OUT in
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip inspect Firewall in
ip nat inside
ip virtual-reassembly
load-interval 30
duplex full
speed 1000
media-type rj45
no mop enabled
!
interface Serial0/0/0
description To MY ISP
no ip address
encapsulation frame-relay IETF
no ip mroute-cache
load-interval 30
serial restart-delay 0
frame-relay lmi-type ansi
!
interface Serial0/0/0.531 point-to-point
description ConexionISP
bandwidth 1920
ip address xxx.xxx.xxx.xxx 255.255.255.252
ip access-group Trafico_IN in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
frame-relay interface-dlci 531 IETF
