How to setup 2600 router with g.703

[mindorewala]

I would like to know how do we install and configure g.703 card on 2600 router.

After installation can we check whether the configuration is correct.

Regards,

Mustafa SFI

[mchin345]

You can find all the information required for configuring the G.703 card on the 2600 router at the following URL.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guide09186a00800e976b.html.

This document describes how to configure1- and 2-port E1 Multiflex Voice/WAN interface cards (VWICs) on Cisco 2600 and 3600 routers for G.703 framing. Hope this link is useful.