How to setup Cisco 890 true webinterface

[wesley]

Hi,

I have a Cisco 890 Router. But I lost the setup CD/DVD to configure my Cisco 890. Can somebody tell me
how I can access the webinterface or setup from this router. Or can I somewhere download the software?

Thx

[Julio E. Moisa]

Hi

Please check this link, basically it is the configuration used on the devices, now if you are going to use the local credentials created on the device you need to configure:

ip http authentication local

The Access-list can be optional.

http://www.cisco.com/c/en/us/td/docs/ios/12_2/configfun/configuration/guide/ffun_c/fcf005.html

Also I was reading you need at least this image installed on your device:

15.2(4)M2
or
15.3(1)T

Hope it is useful

:-)

[wesley]

Hi,

I can access the interface via IP but it asks for username and password. These I don't know anymore. I already reset the router. Is there
any dafault username and password?

Kind Regards

Wesley

[Georg Pauwen]

Hello,

try:

Username: Admin

Password: none (that means empty)

or

Username: cisco

Password: cisco

or

Username: Cisco

Password: Cisco

[wesley]

Hi,

doesn't work :(

I get this:

The server 192.168.1.100 is asking for your user name and password. The server reports that it is from level_15 or view_access

[Georg Pauwen]

Hello,

try 'username1' for both username and password...

[wesley]

Hi,

no luck. Strange. Reset and still nothing

Type: cisco892w-agn-p-k9

[Georg Pauwen]

Hello,

try:

username1

password1

This is a one time username and password and needs to be changed after logging in...

[wesley]

Hello,

also nothing. I dont know what could be the problem here with this router....

[Georg Pauwen]

How do you reset the router ? With the reset button at the back ?

Unplug the router, push and hold the reset button while you plug the power cord back in. Continue holding the reset button for up to 30 seconds and let the router boot as normal.

[Georg Pauwen]

Hello,

have you tried:

admin

admin

[Julio E. Moisa]

Hi

Please check this link:

http://www.cisco.com/c/en/us/td/docs/routers/access/800/hardware/installation/guide/800HIG/initalconfig.html

If you have access via CLI, you can configure:

Example:

username Cisco Privi 15 password Cisco
enable secret Cisco

[wesley]

Hi,

Now it is resetted correctly. Now I have IP 10.10.10.1

Gonna try now the basic username and password

[Julio E. Moisa]

Perfect, please keep us posted.

:-)

[wesley]

Hi,

the following I get when login in to the router is:

Cisco CP Express requires at least Internet Explorer 5.5, Netscape Navigator 7.1,
or Firefox 1.0.2.

Your browser does not seem meet these requirements. (Netscape version 7.0)
You can continue, but proper functioning is not guaranteed.

Using: Explorer 11, also have Firefox and Edge. Chrome also not working.

When clicking OK nothing happens

Kind Regards