Here is our running config with the NAT configuration
When we try to access the webserver from inside our network:
We have tried first with only the inside-out rule but we still got the login window to the router.
Then we added a outside-in rule, but it didn't have any effect.
When we try to access the webserver from outside our local network, we get the following error:
Error
The requested URL could not be retrieved
When trying to retreive the url xxxxx
The following error was encountered:
Connection to Failed
The system returned:
(111) Connection refused
We use CCProfessional in combination with CCExpress to setup the router. Screendumps attached.
Hope somebody can help us out!
Cheers,
Cyberhus Staff
Building configuration...
Current configuration : 5840 bytes
!
! Last configuration change at 21:05:39 PCTime Thu Mar 24 2011 by admin
! NVRAM config last updated at 21:09:39 PCTime Thu Mar 24 2011 by admin
!
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname router
!
boot-start-marker
boot-end-marker
!
logging buffered 51200
logging console critical
enable secret 5 $1$kW.9$.5.LuIPyN5W4IhNoZMaEt1
!
no aaa new-model
memory-size iomem 10
clock timezone PCTime 1
clock summer-time PCTime date Mar 30 2003 2:00 Oct 26 2003 3:00
!
no ip source-route
!
!
ip dhcp excluded-address 192.168.0.1 192.168.0.99
!
ip dhcp pool ccp-pool1
import all
network 192.168.0.0 255.255.255.0
dns-server 8.8.8.8 8.8.4.4
default-router 192.168.0.1
!
ip dhcp pool Printer
host 192.168.0.111 255.255.255.0
hardware-address 0015.9960.1184
!
ip dhcp pool Filserver
host 192.168.0.156 255.255.255.0
hardware-address 0021.85c8.4033
!
!
ip cef
no ip bootp server
ip name-server 8.8.8.8
ip name-server 8.8.4.4
!
!
license udi pid CISCO861W-GN-E-K9 sn FCZ15049974
!
!
username admin privilege 15 secret 5 $1$CPlD$FRJAbIQxPNp55I3Odhx8w/
!
!
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
!
!
!
!
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
description $ETH-WAN$
ip address 93.160.121.146 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
arp timeout 0
!
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip nat inside source list 1 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.0.156 80 93.160.121.146 80 extendable
ip nat outside source static tcp 93.160.121.146 80 192.168.0.156 80 extendable
ip route 0.0.0.0 0.0.0.0 93.160.121.145
!
logging trap debugging
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
no cdp run
!
control-plane
!
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username privilege 15 secret 0
Replace and with the username and password you
want to use.
-----------------------------------------------------------------------
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
!
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
