I need help to configure Cisco 3750g 24 gigabit + 4 sfp

[matteocopelli]

I bought this switch to use it at home to manage the many home automation devices.
When I first accessed it there was no way to enter express setup mode

Not being able to enter that mode, I then looked for guides on how to remedy the problem but trying various types of configurations, the switch does not assign ip addresses.
I tried configuring vlan1 parameters, I tried configuring vlan 2 with its own dhcp pool but nothing.
What I'm trying to do is connect the switch to my router (192.168.0.1) and I would like the switch to assign the devices connected to it different ip addresses like 192.168.10.xxx.
Can you help me or give me some guidance?

ps. I also tried with chatgpt but it doesn't solve anything. I always get to the point where the switch should start assigning addresses but it doesn't.
Thank you.

[M02@rt37]

Hello @matteocopelli,

After loading the switch, what have you got as concerned the prompt?

rommon> ?

[matteocopelli]

After loading the switch in the prompt I see “switch>”

[Joseph W. Doherty]

Results from (w/o quotes) "sh ver"?

[matteocopelli]

Hi, there are the results:

Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(55)SE12, REL
EASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 28-Sep-17 02:29 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02D00000

ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE
(fc1)

Switch uptime is 6 minutes
System returned to ROM by power-on
System image file is "flash:c3750-ipbasek9-mz.122-55.SE12.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C3750G-24TS-1U (PowerPC405) processor (revision F0) with 131072K bytes
of memory.
Processor board ID FOC1341W4WC
Last reset from power-on
2 Virtual Ethernet interfaces
28 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : EC:30:91:A2:7F:80
Motherboard assembly number : 73-10219-07
Power supply part number : 341-0098-02
Motherboard serial number : X.X.X
Power supply serial number : X.X.X
Model revision number : F0
Motherboard revision number : D0
Model number : WS-C3750G-24TS-S1U
System serial number : X.X.X
Top Assembly Part Number : 800-26859-01
Top Assembly Revision Number : E0
Version ID : V03
CLEI Code Number : CNMWS00ARC
Hardware Board Revision Number : 0x09

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 28 WS-C3750G-24TS-1U 12.2(55)SE12 C3750-IPBASEK9-M

Configuration register is 0xF