12-09-2021 06:28 AM - last edited on 12-13-2021 09:17 AM by Translator
BGP-100 (Issue pinging from R5 to R1(customer) via R3)
The router in Intra area not able to communicate with Customer Vrf(Router-1) .
Router 5 has Customer routes on its vrf table, but unable to communicate.
Router 3 directly connected to Customer VRf and it can communicate with customer.
R5 trying to ping vrf RED 11.11.11.11
------------------------------------------------------------------------------
R5#sh bgp vpnv4 un al summ
BGP router identifier 5.5.5.5, local AS number 100
BGP table version is 23, main routing table version 23
4 network entries using 624 bytes of memory
4 path entries using 320 bytes of memory
4/3 BGP path/bestpath attribute entries using 576 bytes of memory
2 BGP AS-PATH entries using 48 bytes of memory
1 BGP extended community entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 1592 total bytes of memory
BGP activity 5/1 prefixes, 5/1 paths, scan interval 60 secs
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
3.3.3.3 4 100 374 580 23 0 0 08:29:26 2
100.5.31.31 4 12345 583 592 23 0 0 08:29:31 2
-------------------------------------------------
R5#sh ip route vrf RED
Routing Table: RED
Gateway of last resort is not set
10.0.0.0/24 is subnetted, 2 subnets
B 10.1.3.0 [200/0] via 3.3.3.3, 02:24:53
B 10.16.35.0 [20/0] via 100.5.31.31, 02:18:08
11.0.0.0/32 is subnetted, 1 subnets
B 11.11.11.11 [200/0] via 3.3.3.3, 01:38:58
16.0.0.0/32 is subnetted, 1 subnets
B 16.16.16.16 [20/0] via 100.5.31.31, 02:18:08
100.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 100.5.31.0/24 is directly connected, FastEthernet0/1
L 100.5.31.5/32 is directly connected, FastEthernet0/1
--------------------------------------------------
R5#sh bgp vpnv4 un all
BGP table version is 23, local router ID is 5.5.5.5
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 1:16 (default for vrf RED)
*>i 10.1.3.0/24 3.3.3.3 0 100 0 1 ?
*> 10.16.35.0/24 100.5.31.31 0 12345 16 ?
*>i 11.11.11.11/32 3.3.3.3 0 100 0 1 i
*> 16.16.16.16/32 100.5.31.31 0 12345 16 ?
-----------------------------------------------
R3#sh bgp vpnv4 un all summ
BGP router identifier 3.3.3.3, local AS number 100
BGP table version is 10, main routing table version 10
4 network entries using 624 bytes of memory
4 path entries using 320 bytes of memory
5/3 BGP path/bestpath attribute entries using 720 bytes of memory
2 BGP AS-PATH entries using 48 bytes of memory
1 BGP extended community entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 1736 total bytes of memory
BGP activity 5/1 prefixes, 5/1 paths, scan interval 60 secs
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
5.5.5.5 4 100 584 378 10 0 0 05:25:17 2
10.1.3.1 4 1 355 367 10 0 0 05:25:34 2
R3#sh bgp vpnv4 un all
BGP table version is 10, local router ID is 3.3.3.3
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 1:16 (default for vrf RED)
r> 10.1.3.0/24 10.1.3.1 0 0 1 ?
*>i 10.16.35.0/24 5.5.5.5 0 100 0 12345 16 ?
*> 11.11.11.11/32 10.1.3.1 0 0 1 i
*>i 16.16.16.16/32 5.5.5.5 0 100 0 12345 16 ?
-----------------------------------------------------------------
R3#sh ip route vrf RED
Routing Table: RED
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 10.1.3.0/24 is directly connected, FastEthernet0/1
L 10.1.3.3/32 is directly connected, FastEthernet0/1
B 10.16.35.0/24 [200/0] via 5.5.5.5, 02:07:03
11.0.0.0/32 is subnetted, 1 subnets
B 11.11.11.11 [20/0] via 10.1.3.1, 01:42:07
16.0.0.0/32 is subnetted, 1 subnets
B 16.16.16.16 [200/0] via 5.5.5.5, 02:07:03
---------------------------------------------------------------------
R1#sh ip bgp summ
BGP router identifier 1.1.1.1, local AS number 1
BGP table version is 8, main routing table version 8
4 network entries using 576 bytes of memory
4 path entries using 320 bytes of memory
3/3 BGP path/bestpath attribute entries using 408 bytes of memory
1 BGP AS-PATH entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 1328 total bytes of memory
BGP activity 5/1 prefixes, 5/1 paths, scan interval 60 secs
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.1.3.3 4 100 370 359 8 0 0 05:17:42 2
R1#
R1#sh ip bgp
BGP table version is 8, local router ID is 1.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 10.1.3.0/24 0.0.0.0 0 32768 ?
*> 10.16.35.0/24 10.1.3.3 0 100 12345 16 ?
*> 11.11.11.11/32 0.0.0.0 0 32768 i
*> 16.16.16.16/32 10.1.3.3 0 100 12345 16 ?
R1#
R1#
R1#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
+ - replicated route, % - next hop override
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 10.1.3.0/24 is directly connected, FastEthernet0/0
L 10.1.3.1/32 is directly connected, FastEthernet0/0
B 10.16.35.0/24 [20/0] via 10.1.3.3, 02:10:29
11.0.0.0/32 is subnetted, 1 subnets
C 11.11.11.11 is directly connected, Loopback0
16.0.0.0/32 is subnetted, 1 subnets
B 16.16.16.16 [20/0] via 10.1.3.3, 02:10:29
----------------------------------------------------------------------------------
! ! ! Last configuration change at 13:38:32 UTC Thu Dec 9 2021 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec ! hostname R3 ! boot-start-marker boot-end-marker ! ! vrf definition RED rd 1:16 ! address-family ipv4 route-target export 1:16 route-target import 1:16 exit-address-family ! ! no aaa new-model no ip icmp rate-limit unreachable ! ! ! ! ! ! no ip domain lookup ip cef no ipv6 cef ! ! mpls label range 300 399 mpls label protocol ldp multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ip tcp synwait-time 5 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 3.3.3.3 255.255.255.255 ip ospf 1 area 0 ! interface FastEthernet0/0 ip address 172.16.34.3 255.255.255.0 ip ospf network point-to-point ip ospf 1 area 0 speed auto duplex auto mpls ip ! interface FastEthernet0/1 vrf forwarding RED ip address 10.1.3.3 255.255.255.0 speed auto duplex auto ! interface FastEthernet1/0 ip address 172.16.23.3 255.255.255.0 ip ospf network point-to-point ip ospf 1 area 0 duplex full mpls ip ! interface FastEthernet2/0 ip address 172.16.36.3 255.255.255.0 ip ospf network point-to-point ip ospf 1 area 0 duplex full mpls ip ! router ospf 1 mpls ldp autoconfig ! router bgp 100 bgp log-neighbor-changes no bgp default ipv4-unicast neighbor 5.5.5.5 remote-as 100 neighbor 5.5.5.5 update-source Loopback0 ! address-family ipv4 exit-address-family ! address-family vpnv4 neighbor 5.5.5.5 activate neighbor 5.5.5.5 send-community extended neighbor 5.5.5.5 next-hop-self exit-address-family ! address-family ipv4 vrf RED neighbor 10.1.3.1 remote-as 1 neighbor 10.1.3.1 activate neighbor 10.1.3.1 next-hop-self exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! mpls ldp router-id Loopback0 ! ! control-plane ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line vty 0 4 login ! ! end
! ! ! Last configuration change at 16:43:36 UTC Thu Dec 9 2021 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec ! hostname R5 ! boot-start-marker boot-end-marker ! ! vrf definition RED rd 1:16 ! address-family ipv4 route-target export 1:16 route-target import 1:16 exit-address-family ! ! no aaa new-model no ip icmp rate-limit unreachable ! ! ! ! ! ! no ip domain lookup ip cef no ipv6 cef ! ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ip tcp synwait-time 5 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 5.5.5.5 255.255.255.255 ip ospf 1 area 0 ! interface FastEthernet0/0 ip address 172.16.45.5 255.255.255.0 ip ospf network point-to-point ip ospf 1 area 0 speed auto duplex auto mpls ip ! interface FastEthernet0/1 vrf forwarding RED ip address 100.5.31.5 255.255.255.0 speed auto duplex auto ! interface FastEthernet1/0 ip address 172.16.25.5 255.255.255.0 ip ospf network point-to-point ip ospf 1 area 0 duplex full mpls ip ! interface FastEthernet2/0 ip address 172.16.56.5 255.255.255.0 ip ospf network point-to-point ip ospf 1 area 0 duplex full mpls ip ! router ospf 1 mpls ldp autoconfig ! router bgp 100 bgp log-neighbor-changes no bgp default ipv4-unicast neighbor 3.3.3.3 remote-as 100 neighbor 3.3.3.3 update-source Loopback0 ! address-family ipv4 exit-address-family ! address-family vpnv4 neighbor 3.3.3.3 activate neighbor 3.3.3.3 send-community extended neighbor 3.3.3.3 next-hop-self exit-address-family ! address-family ipv4 vrf RED neighbor 100.5.31.31 remote-as 12345 neighbor 100.5.31.31 activate neighbor 100.5.31.31 next-hop-self exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line vty 0 4 login ! ! end
! ! ! Last configuration change at 12:01:23 UTC Thu Dec 9 2021 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec ! hostname R1 ! boot-start-marker boot-end-marker ! ! ! no aaa new-model no ip icmp rate-limit unreachable ! ! ! ! ! ! no ip domain lookup ip cef no ipv6 cef ! ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ip tcp synwait-time 5 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 11.11.11.11 255.255.255.255 ! interface FastEthernet0/0 ip address 10.1.3.1 255.255.255.0 speed auto duplex auto ! interface FastEthernet0/1 no ip address shutdown speed auto duplex auto ! interface Serial1/0 no ip address shutdown serial restart-delay 0 ! interface Serial1/1 no ip address shutdown serial restart-delay 0 ! interface Serial1/2 no ip address shutdown serial restart-delay 0 ! interface Serial1/3 no ip address shutdown serial restart-delay 0 ! router bgp 1 bgp log-neighbor-changes network 11.11.11.11 mask 255.255.255.255 redistribute connected neighbor 10.1.3.3 remote-as 100 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line vty 0 4 login ! ! end
Solved! Go to Solution.
12-09-2021 07:10 AM - last edited on 12-13-2021 09:22 AM by Translator
Hi @feroz syed ,
R5 uses 100.5.31.5 as the ping source address, as it appears to be the only connected interface part of the vrf RED.
You need to configure "redistribute connected" on R5 for the ping to work from R5.
router bgp 100
address-family ipv4 vrf RED
redistribute connected
Regards,
12-12-2021 05:38 AM - last edited on 12-13-2021 09:23 AM by Translator
Hi @feroz syed ,
> we can use any specific interface or loop-back to advertise the route under address-family ipv4 vrf ?
You can certainly do that. For instance you can configure a loopback interface on R5 and put it in the vrf. You can then use a network statement to advertise that specific subnet.
int lo999
vrf forwarding RED
IP address 10.99.99.99 255.255.255.255
!
router bgp 100
address-family ipv4 vrf RED
network 10.99.99.99 mask 255.255.255.255
!
Regards,
12-09-2021 07:10 AM - last edited on 12-13-2021 09:22 AM by Translator
Hi @feroz syed ,
R5 uses 100.5.31.5 as the ping source address, as it appears to be the only connected interface part of the vrf RED.
You need to configure "redistribute connected" on R5 for the ping to work from R5.
router bgp 100
address-family ipv4 vrf RED
redistribute connected
Regards,
12-11-2021 09:33 PM
instead of advertise all link,,, we can use any specific interface or loop-back to advertise the route under address-family ipv4 vrf ?
12-12-2021 05:38 AM - last edited on 12-13-2021 09:23 AM by Translator
Hi @feroz syed ,
> we can use any specific interface or loop-back to advertise the route under address-family ipv4 vrf ?
You can certainly do that. For instance you can configure a loopback interface on R5 and put it in the vrf. You can then use a network statement to advertise that specific subnet.
int lo999
vrf forwarding RED
IP address 10.99.99.99 255.255.255.255
!
router bgp 100
address-family ipv4 vrf RED
network 10.99.99.99 mask 255.255.255.255
!
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide