01-05-2016 12:48 AM - edited 03-05-2019 03:03 AM
Hi Team,
I am trying to configure IP SLA on cisco router - Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(3)M3, RELEASE SOFTWARE (fc2)
i dont see any number after "ip sla " in global config of the router, i am getting different option over there.
--
router(config)#ip sla ?
key-chain Use MD5 Authentication for IP SLAs Control Messages
responder Enable IP SLAs Responder
server IPPM server configuration
has anyone seen this kind of option, please let me know how to configure IP SLA on Version 15.4(3)M3, RELEASE SOFTWARE (fc2) router, i have tried using following link, that didnt help much
Thanks/Basavaraj
Solved! Go to Solution.
01-05-2016 02:05 AM
Yes unfortunately ipbase does not support ip sla you will need a higher license like ip service
ipbase only supports the responder not the scheduler and sender
01-05-2016 01:06 AM
Hey what license are you on you prob need an upgrade to support ip sla on it , last time see that router was on lowest license couldn't support it ip sla or pbr etc
01-05-2016 02:02 AM
Looks like we have only ip base licence
----
router#show license
Index 1 Feature: ipbasek9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: securityk9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 3 Feature: uck9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 4 Feature: datak9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 5 Feature: NtwkEssSuitek9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 6 Feature: CollabProSuitek9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 7 Feature: ios-ips-update
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 8 Feature: SNASw
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 9 Feature: hseck9
Index 10 Feature: cme-srst
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: 0/0 (In-use/Violation)
License Priority: None
Index 11 Feature: mgmt-plug-and-play
Index 12 Feature: mgmt-lifecycle
Index 13 Feature: mgmt-assurance
Index 14 Feature: mgmt-onplus
Index 15 Feature: mgmt-compliance
which licence we should buy now for this ?
01-05-2016 02:05 AM
Yes unfortunately ipbase does not support ip sla you will need a higher license like ip service
ipbase only supports the responder not the scheduler and sender
01-05-2016 02:07 AM
Thank you so much Mark for your time and valuable information
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide