ipv6 ping test

[kishorecisco]

hi guys i have configured ipv6 in my packet tracer 5.3.

But i'm not able to ping between the configured routers

[Didier1966]

Hello,

Can you be a litle bit more specific.

Are you PINGING in IOS ?

ping ipv6 ipv6-address [data hex-data-pattern | repeat repeat-count | size datagram-size | source [async | bvi | ctunnel | dialer | ethernet | fastEthernet |gigabitEthernet | loopback | mfr | multilink | null | port-channel | tunnel | virtual-template | source-address | xtagatm] | timeout seconds | verbose]

Or on your PC or MAC TERMINAL ?

PING6

What is your IOS version ?

http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-roadmap.html

http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_10.html#wp2541862

http://ipv6int.net/systems/cisco_ios_router-ipv6.html

I hope this information will help you , and helped me

Best Regards,

Didier.

[kishorecisco]

Hello,

Actually my packet tracer which 5.3v supports configuration of IPv6, but does not support when i use the command to ping.

Ping shows only ipv4 option not ipv6 option.

[kishorecisco]

Actually the command ping ipv6 is not supported in packet tracer v5.3

but it also to configure ipv6 configurations

[cadet alain]

Hi,

show us your config and tell us what ping is not working.

Regards.