cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
567
Views
0
Helpful
8
Replies

IS IT The looping

gandhi.ganesh
Level 1
Level 1

Hi,

I am try to ping my remote site, in which we have Site to site VPN Tunnel betwee our office.

ping result is Reply from 192.168.103.254: TTL expired in transit. & please find the trace result

1 Accepted Solution

Accepted Solutions

You have to have you routing planned, you must decide how you want to route your traffic - static routes or dynamic routing.

Once you plan - then you implement.

HTH>

View solution in original post

8 Replies 8

andrew.prince
Level 10
Level 10

Yes - you have a loop, you need to check the 2 layer 3 routing devices for overlapping config.

HTH>

Yes,

You are right, can u please tell how to overcome this isssues in future

You have to have you routing planned, you must decide how you want to route your traffic - static routes or dynamic routing.

Once you plan - then you implement.

HTH>

Thx for ur time

np - glad to help.

Yes,

You are right, can u please tell how to overcome this isssues in future

tcordier
Level 1
Level 1

Can you add the output of a show ip route on both the devices with IP address 192.168.103.1 and 192.168.103.254, and a show run for both devices?

- Thomas

Andrew was right, there was a looping in my l3 switch(103.1).

I fixed the same

thx for ur reply

Review Cisco Networking products for a $25 gift card