ISDN BRI dialer pool to PRI-T1-BRI

[cwyeager]

Has anyone built an ISDN BRI to accept inbound traffic - then pass that traffic on to a fellow dial pool member to send outbound. Want to be able to have multiple outbound options; PRI, BRI, T1 etc.

Router version:

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IK8S-M), Version 12.2(1), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Fri 27-Apr-01 15:28 by cmong

Image text-base: 0x80008088, data-base: 0x811928F8

Any guidance would be appreciated...

[dsweeny]

This example uses Dialer Profiles for the backup BRI link. You can also use legacy dial-on-demand routing (DDR), which uses the dialer map command for the backup BRI connection.Refer URL for more information

http://www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a008009455e.shtml