10-31-2018 11:49 AM - last edited on 02-20-2023 11:17 PM by Translator
I am trying to upgrade the rommon on a ISR4321/K9 and get the following error.
TEST_NAT#upgrade rom-monitor filename flash:isr4300-rommon.162-1r.pkg all
Invalid file: flash:isr4300-rommon.162-1r.pkg
Cisco IOS XE Software, Version 03.16.04b.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S4b, RELEASE SOFTWARE (fc1)
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 15030325 15.4(3r)S5
R0 15030325 15.4(3r)S5
F0 15030325 15.4(3r)S5
Solved! Go to Solution.
10-31-2018 01:12 PM
I just had to change flash: to bootflash: and it worked
10-31-2018 12:41 PM
Could be a copy error.Can you download the image again and retry?
Also, it looks like you are running a very old image and release notes mention a different ROMMON version, older than what you are trying to upgrade to.
Can you try loading a more recent image and the recommended ROMMON version for the release?
The procedure is correct though.
10-31-2018 01:12 PM
I just had to change flash: to bootflash: and it worked
01-27-2019 01:22 AM
11-05-2019 11:04 PM
Hi. My problem is that I try to downgrade the existing software in Cisco . Finishing copy of package, reload and still with the newer package showing. Any suggests please? Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide