I wonder if legacy WIC-1T and WIC-2T will be supported on ISR G2 (c2900 and c3900) in EHWIC slots.
I received an error message upon c2921 boot up
*Feb 2 14:08:25.107: %MAINBOARD-1-UNKNOWN_WIC: wic card in location 0/0 has an
unknown id 0x2
and "show diag" displays
Slot 0:
C2921 Mother board 3GE, integrated VPN and 4W Port adapter, 7 ports
Port adapter is analyzed
Port adapter insertion time 00:02:58 ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC14010GAD
Hardware Revision : 1.0
Part Number : 73-11835-03
Top Assy. Part Number : 800-30794-01
Board Revision : B0
Deviation Number : 0
Fab Version : 03
Product (FRU) Number : CISCO2921/K9
Version Identifier : V01
CLEI Code : COMGL00ARA
Processor type : C2
Chassis Serial Number : FCZ140371P4
Chassis MAC Address : 8843.e148.9a50
MAC Address block size : 80
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
WIC Slot 0:
Serial 1T WAN daughter card
WIC module not supported/disabled in this slot
Hardware revision 1.1 Board revision E0
Serial number 10536228 Part number 73-1775-02
FRU Part Number WIC-1T=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 02 01 01 00 A0 C5 24 49 06 EF 02 00 00 00 00
0x30: 70 00 00 00 98 10 22 01 FF FF FF FF FF FF FF FF
