Load balancing in ASA

[mohamed.ali]

Dears, 

I have to ISP as well one ASA I wanna to create a load-balance between the two link.
I can do it in Cisco Router like this

ip route 0.0.0.0 0.0.0.0 10.0.0.1  1

ip route 0.0.0.0 0.0.0.0 20.0.0.1  1

In this situation I order the router to load balance the traffic.

how can I do it with ASA 

thanks 

[Karsten Iwen · Accepted solution]

For outgoing traffic you can solve that with Policy-based-routing (PBR):

https://www.cisco.com/c/en/us/td/docs/security/asa/asa94/config-guides/cli/general/asa-94-general-config/route-policy-based.html

It's not load-balancing but still a form of load-sharing. 

[Julio A. Martinez Herrera]

Hi dude:

The last time I was trying with this: https://networkology.net/2013/03/08/site-to-site-vpn-with-dual-isp-for-backup-redundancy/

But it is only useful if you wish to have a redundancy link.

I needed to configure a VPN bet

[carlos.perez1]

Hi experts,
I have the following scenario with some Cisco ASA 5525x

It turns out that our client has 2 Internet Outlets with 2 different internet providers,

We have an ASA 5525x and a Barracuda which is in charge of balancing the internet traffic, but lately it has had problems with its Barracuda and wants to take it out, but it informs us if the ASA has functionalities of doing load balancing towards the internet?

We want to put 2 ASA 5545 or a Firepower depending on the features it has, but I can not find a document in which they detail if the ASA do load balancing the internet?

Currently the barracuda you have if you balance the internet.
If I remove these barracuda, can the ASAs have that functionality?

I look forward to your valuable support.

regards
Carlos P.