Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Dudes ! Nowadays i'm working on my own lab at the office, before installing the equipment. My problem is the routing between the Catalyst 3750x and the Firewall Fortinet connected to my ISP (Service Provider/Internet). I have briefly set on Ca...
Cisco NFP (Network Foundation Protection) is a framework which provides infrastructure protection based on IOS features designed specifically to protect the device control plane (services and routing protocols); the device data plane (malicious traf...
I want to update an AIR-LAP1522AG-N-KP. I want to use TFTP. The problem is that my laptop does not ping any of the interfaces of LWAP.For example:Laptop 192.168.1.100 / LWAP Gigabit0 192.168.1.101 - - ping fails . I have experience using AIR-LAṔ1242A...
Hi dudes : I need to implement a MPLS link over WS-C3750X-24T-S . I have the following information about the switch :################################MDF_A_SITECORE#sh license Index 1 Feature: ipservices Period left: Life time License Type: P...
I have a device AVAYA MEDIA SERVER S8300 (DHCP Server for Voice VLAN) that is connected to Cisco 3750X. The Cisco 3750X is also connectedto other 3 Cisco 3560X through trunk links . I'm implementing a Voice VLAN and Data VLAN . All services through ...
Hi dude ;You can try below configuration, last time it worked for me :
NTP Server 192.168.99.1
R1-TEST#configure terminal
R1-TEST(config)#ip name-server 8.8.8.8 8.8.4.4
R1-TEST(config)#ntp server mx.pool.ntp.org
R1-TEST(config)#ntp logging
R1-...
Hi dude;You can try this First, install a syslog software like TFTPD32. Then you can perform below configuration on your device:Time
SW1# clock set 13:35:30 Oct 07 2018
SW1# configure terminal
SW1# service timestamps
SW1(config)# logging on
SW1(c...
Hi dude:My advice is, connect to the switch via console cable:Power ON and see what is the outcome of the consoleReset the switch back to default settings and see the outcome from the console
Do you have any other device connected to the switch? M...
Hi dude:According with the Hardware Installation Guide you have 3 options:
Management Port
RJ45 Console Port
USB
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/hardware/install/b_c9300_hig.pdf
Maybe this other link would be us...