cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1025
Views
0
Helpful
2
Replies
Highlighted
Beginner

match vlan is not supported for this interface

Hi,

I have a 10Mbps connection link which I will like to reduce to 5Mbps on a 6509 switch as indicated in the config below.

class-map match-all vlan313

match vlan 313


policy-map traffic-policy

     class vlan313

          shape average 5000000 20000 20000



interface Vlan 313

     service-policy input/output traffic policy

After applying the service policy on the vlan interface, i got this

"match vlan is not supported for this interface"

Any idea will be appreciated and if there are other means to achieve this, please do let me know.

I actually tried the rate limit command but I cant see the effect using the speedtest.

Thanks

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Advisor

match vlan is not supported for this interface

Hi,

a VLAN= 1 subnet so you can use an ACL matching permitting the subnet and then match on this ACL.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post

2 REPLIES 2
Advisor

match vlan is not supported for this interface

Hi,

a VLAN= 1 subnet so you can use an ACL matching permitting the subnet and then match on this ACL.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post

Beginner

Re: match vlan is not supported for this interface

Hi Cadet,

Thanks, been quite busy, the ACL grouping solved the issue.

Thanks.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards