I have used 1811 that I have been trying to get configured. I was able to put one of my WANS on Fa1 and configure it as DHCP. For the most part this works. The 2nd WAN I put on Fa0 and it would not work. I finally reconfigured fa0 to be the same as fa1 and moved the cable that I know works to the fa0 port. The config is identical. I rebooted and I cant even get the fa0 port to show the DHCP info, like the ip address etc. I moved the cable back to fa1 and the info comes up without a problem.
This same router seems to like working for a period of time, and then for no reason just stops routing. Without making any changes it just starts again
I am thinking now that there must be something really wrong with this box. I have reloaded the flash with the current bin file and also put in a new flash card. nothing has helped.
Is it dead?